DM 800 hd pro 800hd pro DVB 800 hd se Specifics:
Powerful receiver for digital TV and Radio programs.
Main features are a 300 MHz processor
the 800HD supports the Linux TV API
have a look to HighDefinition TV on your DM
10/100MBit compatible Ethernet Interface
DVI connector
plug & play Tuner
brilliant OLED display
SATA for use either as internal HDD 2,5? or eSATA
-300 MHz MIPS Processor
-Linux Operating System
-OLED-Display
-MPEG-2/ H.264 Hardware decoding
-Tuner: DVB-S, optional: DVB-C, DVB-T
-Tuner Module,Plug&Play
-1xSmartcard-Reader
-V.24/RS232 Interface
-10/100Mbit Ethernet Interface
-1xScart (RGB, FBAS or S-Video)
-HDMI
-2xUSB 2.0
-analog modem
-S/PDIF Interface for digital bit stream out (AC-3)
-64 MByte Flash, 256 MByte RAM
-SATA
-for use either as internal SATA HDD 2,5"
-or use for extern eSATA
-unlimited channel lists for TV/Radio
-channel-change time 60 dB (1 kHz)
Crosstalk< -65 dB
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink
Ausgang Video:
Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS, RGB, S-Video
Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware
Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware
Analoge modem:
analoge modem for Internet connection
SATA Interface:
- for use either as internal HDD 2,5"or eSATA or internal 2,5" HDD
USB
2xUSB 2.0 Host
LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical< 14V no load,>11,5V at 400mA
LNB Voltage horizontal< 20V no load,> 17,3V at 400mA
Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC-Rotor Control
Power consumption:
